Outdoor Walk-In Freezers | Fiberglass Technology

Home » Products » Walk-In Freezers

White Polar King walk-in freezer unit on a sunny day

Close up of a Polar King white commercial walk-in freezer unit

White Polar King freezer unit outside on concrete

White walk-in cooler door open outside on a sunny day

The top of the Polar King walk in freezer door

Inside of a refrigeration unit with tile floors and white walls

Black fans on a white ceiling of a Polar King commercial freezer unit

Inside of a Polar King small refrigerated trailer with white walls and three black fans

Inside of Polar King commercial refrigeration unit

Grey temperature control on a white wall

Get Your Quick Quote

Designed And Engineered Specifically For Outdoor Use

All Polar King Walk-In Freezers provide operating temperatures of 0°F or -50°F (-18°C/-46°C).

As the industry’s #1 manufacturer of seamless fiberglass outdoor walk-in freezers, Polar King units are designed to endure even the most extreme elements and conditions. Polar King walk-in freezers provide on-site storage solutions in through-wall or freestanding applications. As each walk-in freezer unit is built to order, Polar King can customize the walk-in freezer to meet your specific needs and building configuration. Plus, our no hassle delivery means each Polar King walk-in unit will arrive pre-wired, fully constructed, factory tested and ready to operate.

Optional Accessories

Stainless Steel Kickplate
Vinyl Strip Curtains
Shelving Package
Interior Bumper Guards
Custom Finishes
Temperature Data Logging and Monitoring Systems
Reinforced Floor Load
54” Door

Polar King Walk-in Freezers and Energy Efficiency

The seamless fiberglass design of our walk-in freezer units has the highest energy efficiency of any outdoor walk-in on the market. Polar King units offer energy savings not seen in standard metal panel units.

12 Year Complete Structural Warranty
Cuts Operating Costs
Lowers Power Bills
Reduces Maintenance/Repair Costs
Eliminates Construction and Replacement Costs

The patented process for constructing the Polar King walk-in incorporates urethane insulation completely encased in fiberglass, both inside and out. This method provides superior structural strength since it forms a one-piece structure. There are no seams on a Polar King unit; therefore the structure remains completely intact so air and moisture cannot deteriorate the insulation.

One-piece seamless construction allows the unit to be set outside without the use of a roof cap or any other type of expensive protection. The walk-in is completely weatherproof and requires no assembly. Every Polar King comes with a 12-year complete structural warranty ensuring you superior durability even in the worst of weather conditions.

The Polar King walk-in is designed to save you money by cutting operating costs, lowering power bills, reducing maintenance/repair costs and eliminating construction and replacement costs. Polar King uses fiberglass, so you never have to worry about rusting, denting or corroding, and you can be certain that your unit will always look factory new with regular care and cleaning. If you’re looking for a freezer rental or a walk-in cooler rental check out PolarLeasing.com.

Blue and grey layout of refrigeration units

When choosing a Polar King outdoor walk-in, you have the flexibility to choose a thru-wall or freestanding unit. Thru-wall installations allow the operator to place the unit outdoors while providing the convenience of accessing the unit from indoors. Freestanding units on the other hand, are stand alone units that are not attached to the building and are accessed from outside.

The type of unit that is right for you will depend on how you intend to use the walk-in or what type of an operation you have. In many cases, a freestanding unit can later be used for a thru-wall application and vice-versa.

Whether you need a cooler, freezer or combination of both, a Polar King walk-in will save inside space and increase your buying power. Every Polar King unit allows you to design your own floor plan and enables you to locate doors and walls virtually anywhere. This flexibility provides foodservice operators unlimited storage opportunities ideally suited for their application.

Freestanding and thru-wall units come in a wide range of sizes and variations. You can get your Polar King in widths from 6′ to 16′ and in lengths up to 60′. Before you plan to expand, consider the savings a Polar King will provide.

Every Polar King unit includes top quality, dependable refrigeration equipment built for years of worry-free operation. All systems are installed and tested by our expert technicians prior to delivery.* There is no need for a refrigeration contractor on-site when the walk-in arrives to your location. In fact, a simple electrical connection is the only thing required to put most units into operation.**

Standard equipment for Polar King walk-in coolers and walk-in freezers includes:

Seamless Fiberglass Interior/Exterior
Hasp Lock (Ext. Door)
Safety Release Handle
Lockable Door Latch
Close Assist Hinges
Heated Door Jamb
Magnetic Gasket
Door Closer
Sweep Seal
208-230/1/60 Refrigeration System
Low Ambient Controls

Defrost Timer
Heated Relief Port
Light Switch/Pilot Light
Exterior Color Choice
Rain Cap Exterior Doors
Remote Thermometer
Interior Lighting
Crowned Roof
Heavy Duty Non-Skid Floor
Heated Freezer Door

* – Units specified with remote refrigeration are shipped detached from the walk-in and do not include installation and testing of the refrigeration system. Unless otherwise specified, remote systems do not include refrigerant.

** – Electrical connections and on-site wiring must be completed by a licensed electrician and are the sole responsibility of the customer. Polar King delivery drivers do not perform any electrical work on-site.

Standard Colors

Every Polar King walk-in comes standard with any one color finish of your choosing. Our manufacturing process allows us to custom match an exterior building color, so you can choose from thousands of exterior colors to match your décor.

When choosing your exterior color you can choose from any one of our standard colors, or simply provide us with a paint code for the color of your choice. If you are unable to determine which color is most suitable for your application, we can make a near perfect match by using a sample from your current building color.

Polar King can even provide alternative exterior finishes including brick, granite, or even an exact match to the pattern of your building. For examples of previous work and more information, go to our Custom Exteriors & Paint page.

Food shelving and different parts of Polar King freezer unit

The specific needs of each application can vary. That’s why Polar King offers a wide spectrum of optional accessories to make your walk-in even more suitable to your facility.

Polar King also offers graphic design services and customized finish work for walk-in cooler applications requiring logos, advertisements, or intricate color schemes. Ask you sales representative which options are right for you.

Shelving
Ramps
Door View Windows
Security Hasp Locks
Stainless Steel Kick Plates
Digital Thermometers
Temperature Data Recorders
Exterior Lighting
Much More!

Humidity Control Systems

At Polar King, we recognize that the perfect combination of humidity and temperature control is critical in a number of industries. Incorrect humidity levels and fluctuating temperatures can cause spoilage, damage products, and significantly decrease shelf life. We can design a system that provides a variety of different humidity levels and have multiple systems to add and remove moisture.

Crane lifting a tan colored walk in freezer for delivery

Delivered pre-wired, pre-assembled, tested and approved. Ready to Operate.

Polar King uses our own experienced drivers and our own trucks to deliver every unit. You can be certain your new outdoor walk-in freezer will arrive in the same condition it left the factory and will never be out of the hands of company personnel.

When we arrive on-site for delivery we will unload the unit and set it in place using our truck-mounted crane, forklift or whatever is required for a smooth delivery.

There is no need for a refrigeration contractor on site because the refrigeration has been installed and tested at the factory. A simple electrical connection to the building is the only requirement to put the unit into operation.

Learn More

Web Adwords Form

First Name *

Last Name *

Company *

Email *

Phone

Country * Country

State *

Province *

How can we help you?

reCAPTCHA

Polar King

Custom Exteriors

Learn More

Polar King

Custom Paint

Learn More